手机版 |
产品分类 |
动物实验仪器
小动物生理监测系统
Panlab肢体肿大容积测量仪
Panlab平衡测痛仪
Panlab压痛测试仪LE7306)
Panlab热敏甩尾测痛仪
Bioseb梯度温差偏好测试系统
Panlab冷热板仪
Panlab热板仪
Panlab抓力仪LE902
Panlab旋转记录仪
临床检验仪器设备
皮升注射泵PLI-10
生理/药理/神经仪器PE10/20/50/90/100/160/190等
压力导管630297/630299
pH电极
一氧化氮检测仪ISO-NOP
参考电极
PH传感器AMANI系列
氧气检测仪与传感器inO2
新型硝酸盐还原剂NR-16
一氧化氮传感器amiNO系列
分子生物学仪器
BTX MAX transfection大体系转染系统
BTX Hybrimune大体系融合系统
BTX特殊电穿孔电极
BTX电融合电极
BTX活体电极
BTX ECM399指数衰减波电穿孔系统
BTX ECM630指数衰减波电穿孔系统
BTX Gemini SC2双波电穿孔系统
BTX Gemini X2双波电穿孔系统
BTX ECM830方波电穿孔系统
泵
PUMP33 DDS双驱动注射泵
PUMP33注射泵
Mixture/Dose Delivery System
HARVARD高压注射泵PHD 22/2000 Hpsi
高压注射泵PHD ULTRA 4400
超高压注射泵PHD ULTRA XF
精密注射泵Pump 22
PHD ULTRA Nanomite精密注射泵
PHD ULTRA HPSI高压注射泵
恒定压力微量注射泵
恒温/加热/干燥设备
手持式电子温度计!
温度控制器Thermocouple Temperature Controllers
温度测量仪Portable Thermocouple Thermometers
热电偶温度测量仪Monitoring Thermocouple Thermometers
红外测温仪.
便携式测温仪
动物水浴加热系统Heat Therapy Pump.
动物恒温毯
联系方式 |
产品系列
仪器简介:
精密双注射泵Pump 33一个包装中装有两个独立精密注射泵
每个精密注射泵能够以其自己的流速独立工作,可以注射或回吸
针对所有类型的互换程序和相同剂量的稀释操作,均可以对两个注射泵进行同步
连续输注或抽吸,可全天24小时工作
精密双注射泵Pump 33技术参数:
技术参数
类型 带微处理器的双驱动单注射器注射/抽吸型
稳定精度 ± 0.35%
复现精度 ± 0.1%
注射器尺寸:
*小 0.5 μl
** 140 ml
流速:
*小 0.0004μl / hr
** 106.6 ml / min
非易失性存储器 存储所有设置
RS – 232 RJ11 - 4插头
TTL 9 - 针插头
平均直线推力 57 lbs
驱动电机 两个电机,每个为0.9 ˚ 步角步进电机
电机驱动控制 从1/2到1/4 微步步进可以进行微处理器控制
导向螺杆每转一圈电机前机步数 在1/2 步进时1600或者在1/4 步进时3200
步速:
*小 27.3秒/步
** 416.7微秒/步
推进器移动速度:
*小 0.726699 μm / min
** 95.25 mm / min
功率 45 W, 1.0A保险丝
电压范围 95到130V交流, 60Hz, 220到260V交流, 50Hz, 可选
尺寸, 高 x 宽 x 长 15.2 x 31.1 x 28.6 cm (6 x 12.5 x 11.25 in)
重量 6.8kg (15 lb)
精密双注射泵Pump 33主要特点:
The Harvard 33 Dual Syringe Pump offerscontinuous infusion or withdrawal, 24 hours a day, 365 days a yearwith the accuracy and low flow of a Harvard syringe pump.
The Harvard 33 Dual Syringe Pump is a breakthrough in pumpingtechnology. The 33 has two independent pumping channels linkedthrough hardware and software. When combined with a valve box, itprovides the continuous delivery of a peristaltic or piston pumpwith the accuracy, absence of pulsation and low flow rates of asyringe pump.
The Harvard 33 Dual Syringe Pump opens up whole new pumpingpossibilities. These are some of the applications of this pump:
• The injection of dyes, perfumes and flavoring in industrialapplications
• Applications with liquids or viscous materials inmicromanufacturing
• Continuous injections of reactants into reactor vessels
• Simultaneous samplings from two sites
• Continuous injection for long term toxicology testing
Several modes of operation are available to accommodate a range ofsetups and experimental protocols. A unique movable limit switchmechanism is used to change direction or stop operation of the pumpdepending on the mode of operation.
Reciprocal/Parallel Mode - Syringe mechanisms can run in the sameor opposite directions (i.e. both infusing/withdrawing at the sametime or one infusing and the other withdrawing)
Proportional Mode - Different flow rates and syringe diameters canbe set for each syringe mechanism
AutoStop Mode - Pump stops operation when a limit switch isactivated.
Continuous Run Mode - When a limit switch is activated each syringemechanism reverses direction.
The pump has high pressure capability and TTL and RS-232 interfacefor data acquisition and control.
The communication ports enable daisy-chaining of up to 100pumps.